-- [ From: Bob Nogueira * EMC.Ver #3.1a ] --
Don't you just hate it when you go to the local rear axle brass button shop
and have to wait in line to get the button and find out your at the metric
brass button counter and have to go downstairs to the SAE counter and wait
in line again, Anyway I got the brass button for the axle from McMurray
Rear Axle Barss Button Supply Inc* and it appears to solve the problem .
Now on to the next problem
I forgot the order of disassembly of the wheel bearing area. Is it :
Shims, bearing retainer plate, gasket , spacer, gasket , outer seal ,
backing plate
or
Shims ,bearing retainer plate, gasket ,Spacer, gasket, backing plate, seal
Couch's catalog shows
shims, gasket, inner plate ( bearing retainer) gasket.. outer plate (spacer
) seal
he doesn't show the brake backing plate.
This would seem wrong to me since the gasket is between the plate and
shims and would thus be a shim itself. I would think a gasket would make a
poor shim.
Anyone got any thoughts on the matter
Bob Nogueira
Note:
A brass button was supplied to the writer by McMurray Brass Button Supply
Inc for promotional consideration.
_____________________________________
|