Hello all
Well, I was able to remove both master cylinders on my us spec 1973 mgb
without removing the pedal box. After removing the rubber bulkhead plug I
removed the clutch first and brake master cylinder second. Removing the
bulkhead plug allows you to push the master cylinders back and then remove them
up over the front of the pedal box.
John
73 MGB
Sent from my iPhone
> On Nov 17, 2018, at 10:45 AM, John DiFede <difejo1@gmail.com> wrote:
>
>
> On a US spec 1973 left hand drive MGB, is it possible to remove and replace
> the brake and clutch master cylinders without removing the pedal box? The
> Bentley and Haynes books both state this is possible on the older Bâ??s , but
> not the newer models with the tandem (dual circuit) master brake cylinder.
> Iâ??m not looking forward to going up into drivers side footwell to access
> the pedal box bolts. I donâ??t bend or see as well as I used to when I did
> this job 20 years ago!
>
> Thanks
> John. 1973 MGB
> Sent from my iPhone
_______________________________________________
Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/pipermail/mgs
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net
|