Mark,
I may have an air control mechanism from a late '70s pillow dash roadster that
I could send you. Maybe someone else here would be kind enough to verify that
it will fit your '67 BGT?
Cheers,
-Mike Eldred
Wilmington, VT
> Date: Mon, 25 Nov 2013 09:34:54 -0600
> From: mark@nashvilletn.org
> To: mgs@autox.team.net
> Subject: [Mgs] Heater Air Control
>
> Here is my first post regarding my recently acquired 67 BGT. I was
> sorting out the heater air flow control mechanical switch this weekend
> and ran into a problem. The spring on the shaft of the air control that
> holds the knob is missing. Someone in the past had put a set screw in
> the plastic knob that fit poorly in hole in the shaft that held the
> detent. The switch works but not well. I see that the usual sources
> don't have the replacement switch and the plastic won't hold the set
> screw for long. are there any good options to fix the shaft? Maybe a
> replacement spring and detent? I also have minimal flow of hot water
> through the heater core and have ordered a new heater control valve. I
> need to flush the cooling system anyway so I will replace the valve when
> empty the radiator.
>
> Thanks,
>
> Mark
> Nashville
> _______________________________________________
>
> Mgs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/mgs/redscirocco@hotmail.com
_______________________________________________
Mgs@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net
|