Here is my first post regarding my recently acquired 67 BGT. I was
sorting out the heater air flow control mechanical switch this weekend
and ran into a problem. The spring on the shaft of the air control that
holds the knob is missing. Someone in the past had put a set screw in
the plastic knob that fit poorly in hole in the shaft that held the
detent. The switch works but not well. I see that the usual sources
don't have the replacement switch and the plastic won't hold the set
screw for long. are there any good options to fix the shaft? Maybe a
replacement spring and detent? I also have minimal flow of hot water
through the heater core and have ordered a new heater control valve. I
need to flush the cooling system anyway so I will replace the valve when
empty the radiator.
Thanks,
Mark
Nashville
_______________________________________________
Mgs@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net
|