Frank,
Two things to check:
1. The rotor is not grounding to the shaft
2. The carbon contact in the center of the cap is making a good
electrical connection to the rotor.
Charles Hill
2On 7/21/2013 1:21 PM, frankk12@verizon.net wrote:
> Been working on a friends 1964 TR4 fpr the past two days attempting to get it
> running after he broke down. . The problem is no fire to the plugs. The points
> spark and the coil throws a healthy spark when you break the points with the
> ignition turned on but there is no spark getting to the plugs hence the car
> will not run. The distributor is very similar or the same as those in the 60s
> MGBs. To this point we have replaced the points, condenser and coil but
> didn't have a cap or rotor available. Any suggestions as to what should come
> next?
> Frank Krajewski
> _______________________________________________
_______________________________________________
Mgs@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net
|