You lucky if all comes up after 5 minutes....
On May 2, 2013, at 1:00 PM, mgs-request@autox.team.net wrote:
> Yes, after about 5 minutes, I scrape the part with a putty knife, wiping
the
> goo onto a paper towel. I then usually wipe the piece with a town
moistened
> in lacquer thinner, leaving anything on the surface of the metal to
> evaporate. I then sand the part with sandpaper and or the wire wheel in a
> drill. I then spray the part with Restomotive's Metal Ready. Once dry,
the
> part can then be primered (I use an etch or rust neutralizing primer),
> followed by body filler to even out any rust dimples and to smooth the
> surface.
_______________________________________________
Mgs@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net
|