[Mgs] MGA door pillar spacing

["Tom McCay - Classic-Car-World Ltd" <enquiries@classic-car-world.co.uk>]

Hi guys, I'm in the process of starting to strip down my latest project (MK1
MGA1600). The car would appear to be original but in need of a full body off
rebuild with the usual repairs. I'm making a set of door gap bracing out of 1"
square box section to keep the body ridged when I lift it off the chassis. The
bracing will be welded to plates which will be screwed to the hinge mounting
points and the door shut mounting. Measuring everything up I currently have a
1/4" difference between the near side and the off side door gaps when measured
between the inside edges at the top of the A & B pillars. The measurements I
have are 30" & 30+1/4".

Does anyone have the measurements as they should be or a car which is correct
and can take the measurements for me please?

Many thanks

Tom
MK1 MGA 1600
AH 3000 BJ8
Classic Mini Park Lane.
_______________________________________________

Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: 
http://autox.team.net/mailman/options/mgs/mgs-archive@autox.team.net