Surely the only advantage of DOT5/silicone is that is doesn't attack
paintwork, but it's disadvantage is that it is more compressible than glycol
giving a spongier pedal. Moisture will get into all brake systems
regardless of fluid type, and it will lower the boiling point of all of
them. Because silicone isn't compatible with ABS generic car parts places
like Halfords in the UK don't stock it any more, stocking just DOT4 and
DOT4.1, the latter having a higher boiling point than DOT4 or DOT5, and less
compressible than DOT5. However it still attacks paintwork as far as I
know.
----- Original Message -----
> Since over 15 years I use silicone brake fluid in my BGT's brake system.
> Works well with the combination disks / drums.
> Never failed and the advantage is, that this fluid is not hygroscopic -
> i.e. does not attract water.
_______________________________________________
Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|