I installed a cam ground to the '67B specs in my '69 Roadster along with
new double roller chain & gears. At the time I did the rebuild it was
considered the most aggressive of the stock cams. I use the car mostly
to run the major roads at 70 mph and the back country roads at anywhere
from 25 to 55 mph. The engine has a nice, broad torque curve. I can
chug along admiring scenery or zip along in overdrive. Every time we go
for a ride to admire the TX Hill Country scenery I congratulate my self
for using a stock cam.
CR
Elliott and Martha DeGraff wrote:
> I'm rebuilding an engine for a 71B and need a new camshaft. This will
> not be for racing or high performance, just a good solid driver. Can
> anyone recommend a good source? Are there any specific requirements
> or issues such as with the timing gears to watch out for? Any advice
> will be greatly appreciated. Thanks in advance.
>
> Elliott DeGraff
> 71B, 71B in work, 72B next project
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|