Not possible. If the solenoid has full voltage the only thing that can
reduce the current is when a bad connection develops inside the solenoid or
its connection to earth. If you have a bad connection i.e. a resistance in
series with the voltage supply and the load, and measure the voltage between
the bad connection and the load, you will see a drop in voltage. It's Ohm's
Law, and it's called a Law and not a Theory because it always works.
PaulH.
----- Original Message -----
> ... What was happening was that the OD kept getting full voltage but the
> amperage was losing ground, no pun intended.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|