At 03:54 PM 5/16/2009 -0700, Simon Matthews wrote:
>....
>Next question: how to R&R the front bearing?
>....
Grind the flange off the rivets and punch them out. R&R bearing,
replace plate, and install new rivets or use machine screws and
nuts. Suggest a drop of Loctite on the threads. Cut screws flush with nuts.
Barney Gaylord
1958 MGA with an attitude
http://MGAguru.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|