Barney Gaylord wrote:
> At 10:10 AM 5/10/2009 -0500, David Woerpel wrote:
>> ....
>> Should the new bushing be soaked in a light weight oil overnight
>> before installing. At least that's what I've been told.
>> ....
>
> With a sintered bronze bushing there is a 10-second shortcut to the
> overnight soak. Place the bushing on your thunb, open end up. Fill
> with oil to the top. Put your other thumb on top to seal both ends,
> and squeeze firmly. In a matter of seconds you will see oil beads on
> the outside like it was sweating, indicating full saturation of the
> bronze matrix.
>
Now that is very cool....I just tried it. Thanks Barney!
Dave W.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|