Oliver:
I always used dedicated Gr. 5 or 8 bolts to replace the front exhaust
manifold stud & the right rear head stud. With large washers holding a
length of chain onto the bolts, it gave me the ability to tilt the engine
left or right, front or back. Always worked well, whether with an
fixed-position electric lift or hydraulic lift on casters.
Norm Sippel
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|