I would check to see if a local machine shop can okay your cam. maybe just a
polish will clean it up.
or, you can get a reground from the nice people at NorthwestImportparts.
<http://www.northwestimportparts.com/MGB-Reground-stock-cam-62-64-d554.aspx>
Or, the performance one
<http://www.northwestimportparts.com/MGB-Reground-performance-cam-62-64-d555.asp
x>
Of course, check the cam bearings, and timing chain and gears... blah blah
blah...
It never ends... :-)
Eric
Sun, Jan 11, 2009 at 12:22 PM, Max Heim <max_heim@sbcglobal.net> wrote:
>
> > Before I started reassembling the head on my MGB, I thought it would be
> > prudent to take a gander at the tappets. It turned out they were pretty
> > nasty looking. See photos here:
> >
--
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|