I don't know what Moss says about it, but in general they are repair items
for shafts that are worn at the sealing surfaces. So they can theoretically
work anywhere, given that the correct diameter is available.
They are not a solution for a faulty seal, however -- they would be used
with a new seal, to reestablish factory tolerances.
--
Max Heim
'66 MGB GHN3L76149
If you're near Mountain View, CA,
it's the primer red one with chrome wires
on 11/26/08 4:31 PM, Pat Harris - "sammler" at sammler@bellsouth.net wrote:
> According to the Moss catalog, as I read it, the speei-sleeves are only
> for the rear hub or differential.
>
>
> Mike Duvall wrote:
>> Has anyone successfully used the speedi-sleeve with the XPAG oil seal
>> kit? It wouldn't fit my engine. After I got mine all back together,
>> it leaks a little and I want to know if it actually can work. The
>> directions for the speedy sleeve in the seal instructions contradict
>> the addendum which tells you to put the sleeve on backwards.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|