Does anyone have a picture, or a retail source, or a manufacturer's
name and model number, for a spot weld mill? I have used one of
these (borrowed), but I need a picture.
This tool looks like a hand held air drill that holds an end mill
cutter. It also has a C-frame holding a small anvil in front of the
cutter. Position the tool over a spot welded sheet metal flange in
line with a spot weld, pull the trigger, the milling cutter moves
forward with some force to contact the weld while turnimg to cut
through the first layer of metal. Depth of cut is controlled by
adjusting position of the anvil.
Barney Gaylord
1958 MGA with an attitude
http://MGAguru.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|