Mine as a rubber hose clamped on with a bolt clamped into the end of the
hose.
On Tue, 2008-07-22 at 10:38 -0400, Ed Woods wrote:
> List,
>
> I have removed the air pump and gulp valve from my MG's 18V (1972) engine.
> There is a large, 90 degree fitting in the intake manifold that needs to be
> blocked. I don't want to simply cut it off and fill the hole. I'd like to be
> able to put all the emission stuff back on the engine with as little hassle as
> possible if the day ever comes to do so.
>
> So what do I use to block this opening? Any thoughts?
>
> Thanks,
>
> Ed Woods
> ________________________________________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|