Ed Woods wrote:
> Gentlemen and Ladies,
>
> Well, almost two years to the day after pulling the 18V engine for rebuilding,
> I cranked it on the starter today, plugs removed, to prime the oil system.
> After approximately 2 minutes of operation, still no oil at the flex line to
> the pressure gauge or at the oil filter base.
>
> Yes, it has sufficient oil.
>
> I recall a list discussion of different oil pump gaskets. Is that where I need
> to look at this point or are there other possiblilities not involving dropping
> the pan?
>
Is the pressure relief valve installed correctly?
> -The Roxter
> --
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|