Gentlemen and Ladies,
Well, almost two years to the day after pulling the 18V engine for rebuilding,
I cranked it on the starter today, plugs removed, to prime the oil system.
After approximately 2 minutes of operation, still no oil at the flex line to
the pressure gauge or at the oil filter base.
Yes, it has sufficient oil.
I recall a list discussion of different oil pump gaskets. Is that where I need
to look at this point or are there other possiblilities not involving dropping
the pan?
TIA,
Ed Woods
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|