Ed, have you made the modification to the transmission crossmember that allows
you to tighten the bolts on the transmission? Basically,
you drill 2 holes through the crossmember to allow you to pass a socket through
to the bolts.
Dan D
Central NJ USA
'76 MGB Tourer - Driver - Engine Surgery In Progress...
'65 MGB Tourer Project - Yep, Still Is....
NAMGBR #5-2328
http://dans65b.blogspot.com/
http://dansautoblog.blogspot.com/
http://mywebpages.comcast.net/dibiase/Working_MG_Gallery.html
----- Original Message ----
From: Ed Woods <fogbro1@comcast.net>
To: mark.jones@exxonmobil.com
Cc: Mgs@autox.team.net
Sent: Wednesday, June 18, 2008 10:18:08 PM
Subject: Re: [Mgs] transmission switches
Mark,
Thanks for the drawings of the transmission mounting and remote shifter
assembly.
The step by step removal/replacement instructions for the transmission
mount/X member were invaluable, especially the part about starting the rear
transmission bolts before offering up the X member.
Ed Woods
You are subscribed as d_dibiase@yahoo.com
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|