You may have a throttle plate that isn't centred or has a loose screw and
has become uncentred, jamming the throttle slightly open. Or the throttle
shafts may be passing too much air. Either way, the carb probably has to come
off to inspect it (unless you wiggle the shaft and it is clearly too loose -
in
which case the carb has to come off anyway).
Bill
In a message dated 13/05/2008 6:35:04 A.M. Pacific Daylight Time,
guinness@stclegal.com writes:
Can I fix the carb without removing it (man is space tight
around there -- but I hate dealing with the carb stud nuts, vacuum
tube, spring holder, etc.)?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|