Allen:
The voltage regulators had to be specified for the amount of current
draw, so the bi-metalic unit would function correcly. A unit that fed
one gauge would be different than a unit designed to feed two.
Modern solid state versions have a much wider range of application, the
only requirement is to get the polarity correct.
Kelvin.
> -----Original Message-----
> From: mgs-bounces+doddk=mossmotors.com@autox.team.net
> [mailto:mgs-bounces+doddk=mossmotors.com@autox.team.net] On
> Behalf Of Allen Hess
> Sent: Monday, April 28, 2008 1:45 PM
> To: mgs@autox.team.net
> Subject: Re: [Mgs] voltage stabilzer
>
> Regarding being very model specific, the electronic
> replacements which Moss sells use the same part number for
> MGB and TR4 (I have both cars). They are polarity sensitive
> with a part # for + - . The original type is no longer in the catalog.
>
> Thanks, Allen
>
> On Apr 28, 2008, at 1:56 PM, John Cahoon wrote:
>
> > Allen
> >
> > Voltage stabilizers are very model specific.
> > Orientation is important & one installed backward/upside
> down will not
> > work correctly. Triumph and MGB are totally different in
> this regard.
> > The Mini application I do not know.
> >
> > What you need to do is have your input connected to a battery [12+
> > volts]. Then the output should yield some 6 volts when it is
> > grounded. Usually the base unit needs to be grounded as
> well. This is
> > a rough test for functionality and does not cover the gauge
> or sending
> > unit.
> >
> > Hope this is useful. JOHN CAHOON
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
>
> You are subscribed as doddk@mossmotors.com
>
>
> Mgs@autox.team.net
> http://autox.team.net/mailman/listinfo/mgs
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|