It did come from my local Mini dealer (Mini City Ltd. Rochester, NY).
I did try it out and I thought it was reading too low. I have since
devised another checking method. I hooked up a good sending unit.
Brought a pan of water to a boil. Took pan to car and placed the
sending unit in it along with a thermometer. I can then compare temp
gauge with thermometer as the water slowly cools.
My favorite Mini dealer has since found in his stash a BR1308/00, so
I'll be able to compare both.
Thanks
On Apr 28, 2008, at 11:52 AM, Paul Hunt wrote:
> BR1310/00 seems to be for the Mini. I can't see why the gauge
> requirement should be that different, but a different mounting
> arrangement would certainly result in a different part number. I'd
> hook it up and see what happens, it can't do any harm. Make sure
> you have a good earth/ground to the body of the stabiliser.
>
> PaulH.
>
> ----- Original Message -----
>> ... The one in the car is #BR 1308/00. I have
>> a NOS BR 1310/00 which has the mounting bracket in a different
>> direction, but it will fit.
>>
>> Are the internals the same? Do the part numbers indicate different
>> voltages or just mounting brackets?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|