To: | "Rick Lindsay" <rolindsay@yahoo.com>, "MGS" <mgs@autox.team.net> |
---|---|
Subject: | Re: [Mgs] Rear axle nut socket |
From: | "Paul Hunt" <paul.hunt1@blueyonder.co.uk> |
Date: | Thu, 27 Dec 2007 14:48:42 -0000 |
Got mine off the shelf from the local (UK) place. If you get a 1/2" drive non-impact you *should* be OK, it's the 3/4" and impact that may be too big. The hubs seem to have an ID of around 1.8", and my socket is 1.73". PaulH. ----- Original Message ----- > You guys found a good source for a thin-wall socket > to fit the rear axle nut on a wire-wheel '70 B? _______________________________________________ Support Team.Net http://www.team.net/donate.html Mgs@autox.team.net http://autox.team.net/mailman/listinfo/mgs http://www.team.net/archive |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [Mgs] A few pictures of the tear-down for the top-end job, Rick Lindsay |
---|---|
Next by Date: | [Mgs] Anti freeze Weep From Head Gasket, Valda and Merl Rosenthal |
Previous by Thread: | Re: [Mgs] Rear axle nut socket, Andrew B. Lundgren |
Next by Thread: | [Mgs] A few pictures of the tear-down for the top-end job, Rick Lindsay |
Indexes: | [Date] [Thread] [Top] [All Lists] |