Before I list the tear-down pictures, here is a
picture of the '70 B's completed right-front axle:
http://www.aubard.us/MGB/HPIM0848.JPG
I have started the top-end job on my MGB. Here are a
couple of pictures as the tear-down begins.
http://www.aubard.us/MGB/HPIM0851.JPG is a picture
with the inlet and exhaust headers removed or
disconnected. The coolant has not yet been drained so
I have not opened that system.
http://www.aubard.us/MGB/HPIM0852.JPG is a picture of
the right-hand side. You can see the heater control
valve that I forgot to change when I had the coolant
system apart. I'll change it now. BTW, I did verify
that there is adequate valve clearance and that a
closed-up clearance is not the problem.
http://www.aubard.us/MGB/HPIM0853.JPG shows the carbs
and manifold, plus a few tools, on the workbench.
I'll need to store these parts carefully so as to get
a little more work-space on the bench to rebuild the
head.
So that's it for Wednesday evening...
rick
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|
