all I did was cut off the tyre valve adapter end thing and attached the
resultant end of the hose onto an old blow gun (the kind with the straight
metal pipe). I just used a wire tie to secure it. Turn the pressure down
on the compressor and you're good to go.
Safety Fast!
Gordie Bird
'62 MGA
'67 MGBGT
>
> On Fri, 7 Jan 2005 18:48:35 -0500, Gordie's Garage
> <mg_garage@comcast.net> wrote:
> > I've modified my ezbleed to connect to my compressor and it
> works great.
>
> How did you do this?
>
> For an interesting piece of possible trivia, a few years ago, I pulled
> my easibleed out to use it for the first time on my MGA. The cap was
> rusted in place, fortunately, the rusted cap fitted.
>
> Now here is the strange part: I'm pretty sure that the previous use of
> my easibleed was on my Alfasud. Imagine that: the same M/C cap on an
> Alfasud as a '57 MGA.
|