Brown or white on the fusebox. Don't use the coil +ve as the voltage there
on a rubber bumper is fluctuating between 12v and 6v with the engine
running. Strictly speaking it would be better to use the purple or the
green side of the fusebox as these are fused (the brown and white are
unfused), but the chances of shorting anything to ground while the clips are
connected should be pretty minimal.
PaulH.
----- Original Message -----
From: "Bill Saidel" <saidel@camden.rutgers.edu>
To: <mgs@autox.team.net>
Sent: Monday, August 23, 2004 9:07 PM
Subject: battery voltage under the hood
> Where can I tap into the battery voltage for a timing light connection
> under the hood of a B?
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|