I am disassembling the rear axle and am having trouble removing the rear
hub. I got the cotter pin out without incident; the 1 5/16" crown nut
holding the hub to the axle shaft will not budge. I have tried a
breaker bar with a hammer and an impact driver and cannot get anything.
I have made sure that the front of the differential is not spinning, so
I can rule that out. Last, does the side of the car impact which way
the nut spins? I think the banjo axle does, but my tubed axle does not.
Any help would be great.
Matthew Hale
67 B
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|