What car? What year? What country? North American MGBs changed from carb
vacuum to manifold vacuum in about the 1971 year using a port on the inlet
manifold. Before that, and for the UK until 76 or 77, it went to a small
pipe on top of the rear (usually, although Clausager shows a UK 75 with it
on the front) carb throat quite close to the manifold flange.
----- Original Message -----
From: "Chad Cooper" <mgb72@airmail.net>
To: <mgs@autox.team.net>
Sent: Monday, May 26, 2003 5:57 PM
Subject: Vac. Advance question...
> Where do I connect the vacuum advance hose from the distributor? A
friends car
> has the hose just lying there, all the carb ports are capped The carbs
are
> HS4's. The advance holds vacuum so I want to hook it up. My car has the
> Mallory dist with no Vacuum adv. so I have no reference.
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|