Yeah, that would be a 1-15/16ths socket. Nice round number, that...
on 4/30/03 11:28 AM, Dave B. Hammond at dbh@hamengr.com wrote:
> I'm trying to undo the nuts holding the hubs on an mga rear axle. A 2"
> socket seemes too big and a 1 7/8" seemes too small. Any advice would be
> appreciated.
> Dave
> 1622 mga
>
--
Max Heim
'66 MGB GHN3L76149
If you're near Mountain View, CA,
it's the primer red one with chrome wires
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|