I changed a 1/4-light hinge by drilling out the old rivets etc with the
glass still in the frame. I used a tube over the drill bit to limit the
depth and stop it suddenly bursting through the end of the old rivet and
hitting the glass.
----- Original Message -----
From: "R. Martin Rogovein" <rmort@bezeqint.net>
To: "Mg Mailing List" <mgs@autox.team.net>
Sent: Monday, March 10, 2003 9:51 AM
Subject: vent window hinge
> OK, here's one I haven't seen in the archives . . .
> The lower hinge (the half connected to the window) on my vent window is
> broken.
...
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|