Kent:
That wire has to flex to allow the points plate to rotate. So long as all
the strands are still intact don't worry about it.
Kelvin.
>
> On my '69 B/GT, inside the distributor the bare copper "earth lead" on
> the moving contact breaker plate looks really fragile and
> thin. I often
> wonder if it will cause a weak spark at the plugs. Should I take the
> time to replace this wire w/ another thicker wire. It
> appears that one
> end is soldered and/or stamped onto the breaker plate. What do you
> suggest here?
> -Kent
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|