I remember watching my father lying his truck tires on the side, then then
driving over the rubber with the truck.
(Obviously you could not take them all off, as you need 4 on the truck to drive
it.)
Once the bead was popped loose, then he would do the rest manually.
Max Heim wrote:
> In theory you can do it with tire irons, or even with large screwdrivers,
> but I couldn't manage it myself. YMMV, give it a try.
>
> on 9/18/02 11:27 AM, Dan DiBiase at d_dibiase@yahoo.com wrote:
>
>
>>I want to remove the tires from the wheels of my '65B project. Is this as
>>simple as deflating the tires and levering them off the rim? Any special
>>tools required? The wheels are steel, not wires... Thanks in advance.....
>
--
Andrew Lundgren
lundgren@byu.net
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|