In a message dated 8/7/2001 4:45:30 PM Eastern Daylight Time,
rexcats@pacbell.net writes:
> Hi this is about our 79 MGB, we have rebuilt the single zenith strom carb,
> replaced the distributor cap, plugs, wires/connectors and yes they are in
> the correct firing order<G> here is what is happening you can start the car
> but it does not stay running. So what do we do now? is it too lean, too
> rich.
>
> Thanks
>
> Justin
>
Does it stop immediately after releasing the starter? If so the ballast
resister may have opened up, after started the current flows thru the ballast
resister before it gets to the coil.
Jerry Rein
///
/// mgs@autox.team.net mailing list
/// (If they are dupes, this trailer may also catch them.)
|