Thanks Paul, that would appear to be where my vacuum takeoff is connected for
the brake servo.
Bud
Ptegler wrote:
> directly to the rear most port on the intake manifold
> I just whipped up a page with a couple of photos
> http://www.toad.net/~wizardz/runon/index.html
>
> the connection is in the very end of the manifold, sticking
> slightly up at an angle.
> ....hope the photos help
>
> Paul Tegler ptegler@cablespeed.com
> www.teglerizer.com
>
> ----- Original Message -----
> From: "Bud Krueger" <bkrueger@ici.net>
> To: "MG List" <mgs@autox.team.net>
> Sent: Tuesday, April 03, 2001 7:22 PM
> Subject: Anti run-on valve plumbing
>
> > Don't mean to be a pest, but ... Is there someone out
> there with an SU-equipped
> > B with a working anti run-on valve? If so ... would you
> please tell me where
> > the small hose from the valve (not the charcoal cannister)
> is connected to on
> > your intake system? Many thanks.
> >
> > --
///
/// mgs@autox.team.net mailing list
/// (If they are dupes, this trailer may also catch them.)
|