mgs
[Top] [All Lists]

Re: How to check cam wear?

To: Matthew Trebelhorn <matttrebelhorn@netscape.net>
Subject: Re: How to check cam wear?
From: Charley & Peggy Robinson <ccrobins@ktc.com>
Date: Tue, 17 Oct 2000 11:19:45 -0500

  You can put a dial indicator on each rocker, at the pushrod end and
measure the lift against the spec.  

  You also have to take into consideration that the rocker shaft &
bushings might be shot.

  CR


<Prev in Thread] Current Thread [Next in Thread>