In February, 1977, an MG service bulletin
"Coolant Leakage - Cylinder head gasket
In the event of coolant leakage from the cylinder head it is recommended
that a 5 1/2 ounce can of "pelletized" Bar's leak be added to the cooling
system.
Bar's leak, part # BAR-1, should be added into the cooling system through
the top hose only.
Material can be claimed under warranty, Part #BAR-1, with a labor
allowance of 00.30 hours for those vehicles still within warranty."
This is quoted from Norman Nock's book, Tech Talk.
On Fri, 15 Sep 2000 15:20:59 -0600 "Larry Hoy" <larryhoy@prodigy.net>
writes:
> Seems to me I read somewhere that some automobile manufactures use
> Bar's Leak,
> or a similar product, in new cars.
>
|