>From: MGMagnette@aol.com
>
>On what part of the engine would I attach lifting gear?
>
>
>John Elwood
Are there not lifting hooks on the valve cover bolts? If not, perhaps
remove the head, slip chain links over the head studs and place a few heavy
washers over them to keep them from slipping past the stud nuts. Other
possibilities if you leave the head on: a rear manifold stud and a
thermostat housing stud - or the bolt in the front plate for the generator
adjusting link.
I favor removing the head, as well as starter & generator - anything to
reduce weight and bulk - making it easier to manipulate.
2¢...
Allen
mg-mg-mg-mg-mg-mg-mg-m-gmg-mg-mg
Allen Bachelder
'73 B - "done"
'76 B - daily driver
'73 GT - awaiting front wings
'65 B shell - awaiting paint
'67 GT - awaiting everthing
'57 ZB - parts car or resto-candidate? - awaiting decision
'49 YT - in "progress"
mg-mg-mg-mg-mg-mg-mg-mg-mg-mg-mg
|