Sprayed starting fluid in the RADIATOR? (Assuming you mean carburetor). I
would check the distributor, you may have gotten it wet inside during your
radiator (carburetor?) flush job. Check your staic timing too, you may have
bumped the distributor out of time. Hope this helps!
Doc
In a message dated 9/27/99 3:49:28 PM Mountain Daylight Time,
RHSinclair@USWest.net writes:
> I am having some trouble Starting my '68 MGB. I just converted it from
> 2 six volts to 1 12, and I flushed the radiator and gapped the plugs.
> I got some starting fluid, sprayed some in the radiator, and turned
> the key. It cranked, sputtered a bit, and then just cranked some more.
> More starter fluid, and then cranked it. It didn't even sputter. There
> is gass on the plugs, and they are sparking. Please Help!!!
>
> Rory Sinclair
>
|