john peloquin wrote:
>
> Dear Seat Replacers,
>
> I used the diaphragms and though they weren't easy, it's not too bad if
> you warmed them up first, then put in the hooks on one side, then put them
> in the opposite side with vise grips rather than your hands. Also,
> immobilizing the seat frame in a vise or benchmate helps a lot!
>
I don't remember where I got the tip but I took a big old flat
screwdriver and with a grinding wheel I ground a notch into it like one
of those dandelion pullers. Using that I was able to get the hooks into
the holes a 'little' easier. The bigger and uglier the screwdriver the
better.
Carl F
67B
|