Chris Chandler wrote:
>
> Of course now all the electricals are shot. No tachometer, turn signals
> (hazards DO work, so it's not the bulb/ground), tail lights, gas gauge,
> etc.
Could still be bulbs and/or grounds as turns signals are very
susceptible to these faults but hazards not at all so.
> I also tried to deal with the turn signals as they were working when I
> test drove the little beast. After hauling out the proper schematic, it
> seems that the purple wire that feeds the turn signals has no juice.
It is the green circuit (fused ignition) that feeds the turn signals.
It goes via the hazard switch when that switch is off. This switch is a
frequent cause of non-functioning turn signals. The purple (fused
always hot) feeds things like horns and interior lights.
> Any thoughts on why the tach is not working?
Green circuit again?
PaulH.
|