Look for corroded pistons. Also possible to have a master cyl problem that may
cause, I believe. John
William C. Mills wrote:
> My friend Joe and I were talking this morning about the front brake pads on
> his '80 roadster which are apparently dragging on the rotors. The
> conventional wisdom of the list would point to old brake hoses not allowing
> the pressure to release, but Joe has new brake hoses on the front.
>
> Would air in the system cause the pistons to not retract? Thought bleeding
> the system might help. Any thoughts about where to look for the problem?
>
> Bill
> '74 BGT
|