Andrew Errington wrote:
>
> Hi,
>
> I have a quick question. Will the bearing spacer inside the front hub pass
> through the outer race of the inner bearing (!). The reason for asking is
> that I have new front hubs and bearings and I should like to drift the outer
> races of the inner and outer bearings into place, but of course I cannot fit
> the bearing spacer until I rescue it after taking the old hubs off the car.
>
> Many thanks,
>
> Andy
> ---
> '69 B Roadster
Yes, as you have to press the outer races into the hub first anyway. Well, I
suppose you don't *have* to but it is probably easier to.
PaulH.
|