I used the input shaft on my tranny as an alignment tool.
The tranny is very "light" and it work pretty well :- /
Why use a dummy, when you have the real thing !
john.kahoon@juno.com
71 midget
On Tue, 23 Jun 1998 21:58:13 -0500 Tyson Sherman <tsherman@tecinfo.com>
writes:
>Is it necessary to have the clutch alignment tool to reinstall the
>clutch onto the flywheel? I have a feeling I might be putting my
>engine
>back together next week so I'd need to get the (very cheap - about $4)
>part here before then. The machine shop removed my rounded-off bolt
>free of charge, and my parts arrived, so getting my 76 B back on the
>road is starting to be a reality. Next...72 Midget time!!
>
>--
>Tyson Sherman
>http://www.tecinfo.com/~tsherman
>
>
>
|