PAINTRIX wrote:
I have leaky wheel cylinders and a
> set of the stainless steel braided hose set to install.
Smart alek answer. I suggest you install non-leaky wheel
cylinders.
While I am at it I
> thinking of replacing the fluid with a silicone type.
Unless you are replacing the master and doing a rebuild on the
front calipers I do not recommend using silicone. There is a good
likely-hood that you will have compatability, or foreign material
problems. From my experience, unless the system is completely clean,
the benefits of using silicone are outweighed by the liabilities.
Kelvin. 2 cars with silicone, 5 cars without.
|