In a message dated 98-02-28 17:14:27 EST, ame@synaptics.com writes:
<<
Hi all,
so it's like this, see. I fit a new seal to the trunk lock, which
pads it out by about 1mm. I close the trunk. The 1mm padding
prevents the lock button from fully depressing the catch, so the latch
does not release.
Oops.
Anyone got any (non-destructive) suggestions to get it open again?
Thanks,
>>
Andy,
I did the same thing! Luckily after driving it, it came open by itself. I
then adjusted it and it stuck again-don't hit the trunk with palm of your hand
as I found out that it leaves a dandy dent. Unfortunately, I don't remember
the exact drill for opening it!
Good luck!
Tom Green
|