On Mon, 9 Feb 1998 Terry Williams <mgguyc100@newedge.net> wrote:
>I'd check the seal around the gas filler neck. Also, check the seal on the
>rubber grommets that your wiring for the licence plate lamp pass through.
>Yet another may be the holes that the pins that the MG & octagon badge mount
>to the deck lid.
>
>Good luck!
>
>Terry 'High & Dry' Williams
>'70 BGT
>'68 roadster
If you haven't done it already, I would also replace the seals on your
tail lights. Then I would apply silicone sealer to all the points of
entry -- tail lights, back up lights, & badges. I did that last winter
and that seemed to have solve my problem.
Joseph
67 B Roadster
|