Dave Houser wrote:
>
> Anybody got a source for all the fine-threaded 10-32, 1/4-28, etc. nuts
> and bolts on our B's?
> Cad plated and stainless preferred. Catalogs or stores.
> (Wirebrushing each and every nut and bolt isn't leaving too much skin on
> fingertips)
> Moss doesn't seem to offer a general bag of extra, most needed stuff in
> quantity.
>
> Thanks in advance,
> Dave Houser(I was wearing gloves)
Dave
Give Todd Clarke a try at Clarke Spares and Restorations. He MAKES a
lot of bolts and little bits for our LBC's. And if you had a mind to
you could take a short drive over to Doylestown and pick them up.
Todd's number is 215-348-0595.
Rick
<http://www.geocities.com/motorcity/9945>
|