Dave,
The vast majority of the bolts, nuts and other fasteners on our cars can
be found at any decently supplied hardware store, as they are "standard"
sizes. Ie. 1/4 -28 is a SAE fine.
Personally, I get most of what I need at the Lowes' near my house.
They also have a selection of Grade 8 hardware, and I'll only use Grade
8 on critical components. For all else, Grade 5 or above is OK. I don't
use ungraded fasteners. Period.
Rick Morrison
72 MGBGT
74 Midget
On Tue, 30 Dec 1997 12:05:21 +0000 Dave Houser <mgs4dave@warwick.net>
writes:
>Anybody got a source for all the fine-threaded 10-32, 1/4-28, etc.
>nuts
>and bolts on our B's?
>Cad plated and stainless preferred. Catalogs or stores.
>(Wirebrushing each and every nut and bolt isn't leaving too much skin
>on
>fingertips)
>Moss doesn't seem to offer a general bag of extra, most needed stuff
>in
>quantity.
>
>Thanks in advance,
>Dave Houser(I was wearing gloves)
>
|