Re: torque setting

To:	stritle@epix.net
Subject:	Re: torque setting
From:	JMerz140@aol.com
Date:	Wed, 15 Oct 1997 11:43:20 -0400 (EDT)

Steve,
Reinstall the shims as you found them... Probably they were installed to make
up for shaving the head at some earlier time and is a recommended procedure
under that condition.  Sometime, when the head is off anyway, measure the
thickness of the head to determine if its ever been milled.  For now, you
just have to assume that the shims are there for that reason and need to be
kept in place.  Jim

<Prev in Thread]	Current Thread	[Next in Thread>
torque setting, Steven Tritle Re: torque setting, Steven Tritle Re: torque setting, Syd Saperstein Re: torque setting, Syd Saperstein Re: torque setting, Steven Tritle Re: torque setting, Skip Kelsey Re: torque setting, JMerz140 <= Re: torque setting, Steven Tritle Re: torque setting, JMerz140 Re: torque setting, Chris Delling Re: torque setting, Skip Kelsey Re: torque setting, JMerz140 Re: torque setting, ROBERT G. HOWARD Re: torque setting, Chris Delling Re: torque setting, Chip Old Re: torque setting, Chip Old Re: torque setting, JMerz140

Previous by Date:	RE>Still won't idle, Alan Bidgood
Next by Date:	RE:Still won't idle, Alan Bidgood
Previous by Thread:	Re: torque setting, Skip Kelsey
Next by Thread:	Re: torque setting, Steven Tritle
Indexes:	[Date] [Thread] [Top] [All Lists]